Huawei iSitePower-M MAP05A1 User Manual page 45

iSitePower-M (MAP05A1, MAB05B1)
User Manual
Table 4-5 Recommended battery configuration
Scenario
Single system
Single system
(capacity
expansion
scenario)
Parallel
system
Issue 06 (2023-04-24)
NO TE
● Maximum capacity: In single-system scenarios, a maximum of six battery modules can
be connected. In parallel-system scenarios, a maximum of three power modules can be
connected. Each power module can connect to a maximum of three battery modules.
● In parallel-system scenarios, three routes of single-phase output can be combined but
they cannot be used as three-phase output.
● In parallel-system scenarios, it is recommended that the number of battery modules on
the master and slave products be the same.
● In parallel-system scenarios, if the number of battery modules in the master product is
different from that in the slave product (not recommended), for example, two power
modules and five battery modules, the power/capacity of battery modules is 9 kW/25
kWh.
● In parallel-system scenarios, if the number of battery modules in the master product is
different from that in the slave product (not recommended), the products with larger
capacity may fail to fully discharge in heavy load scenarios.
● One power module and one battery module: If the product supplies power separately,
the load power cannot exceed 2.5 kW. If the load power exceeds 2.5 kW, the product
shuts down for 10 seconds and then restarts, which repeats for three times. The product
runs with a power limit of 2.8 kW for 1 hour and then stops working.
Number of
Power
Modules
1
2
3
Copyright © Huawei Digital Power Technologies Co., Ltd.
Number of Maximum
Battery Output
Modules Power
1 2.5 kW
2 5 kW
3 5 kW
4 5 kW
5 5 kW
6 5 kW
2 5 kW
4 9 kW
6 9 kW
3 7.5 kW
6 13.5 kW
9 13.5 kW
4 Product Description
Capacity
5 kWh
10 kWh
15 kWh
20 kWh
25 kWh
30 kWh
10 kWh
20 kWh
30 kWh
15 kWh
30 kWh
45 kWh
36