Huawei iSitePower-M MAP05A1 User Manual page 176

iSitePower-M (MAP05A1, MAB05B1)
User Manual
Figure 11-4 Connecting to the device
Step 2 Configure communications networking parameters and the management system
domain name based on site requirements.
Issue 06 (2023-04-24)
NO TE
● The Quick Setup screen is displayed upon the first login.
● Use the initial password to log in for the first time and change the password as
prompted. To ensure account security, protect the password by changing it periodically,
and keep it secure. Your password might be stolen or cracked if it is left unchanged for
extended periods. If a password is lost, devices cannot be accessed. In these cases, the
Company shall not be liable for any loss.
● If the login screen is not displayed after you scan the QR code, check whether your
phone is correctly connected to the device WLAN. If not, manually select and connect to
the WLAN, and tap Next.
● In a parallel system, perform quick setup on the master product.
NO TE
● In parallel system scenarios, set communication networking parameters and the
management system domain name on the master system.
● (Optional) If the connection mode is set to FE, choose Maintenance > Network
Configuration > Local Area Connection to configure router parameters after the quick
settings are complete.
Copyright © Huawei Digital Power Technologies Co., Ltd.
11 System Commissioning
167