iSitePower-M (MAP05A1, MAB05B1)
User Manual
10.3.2 Installing Internal Cables
● Do not reversely connect positive and negative battery module power cables.
● Use the power cables delivered with the product. If the number of cables is
When a communications terminal is connected to a single network cable, a
waterproof rubber plug must be installed.
Procedure
Step 1 Install a PE cable.
Figure 10-19 Installing a PE cable
Step 2 Install battery module power cables.
Issue 06 (2023-04-24)
CA UTION
insufficient or any cable is damaged, contact the vendor to obtain cables. Do
not prepare cables by yourself.
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
10 Electrical Connections
114