Pv+Mains+Genset+Ess - Huawei iSitePower-M MAP05A1 User Manual

iSitePower-M (MAP05A1, MAB05B1)
User Manual

9.2.6 PV+Mains+Genset+ESS

Table 9-13 Cables in single-system scenarios (including capacity expansion)
No. One End
1 PV input
port
2 AC output
port
3 AC input
port
4 COM and
dry contact
ports
5 Ground
point
6 Ground
point
Table 9-14 Cables in parallel-system scenarios
No. One End
1 PV input
port
Issue 06 (2023-04-24)
Other End Type
DC switch Common outdoor PV
(customer cable in the industry
side)
PDB Outdoor three-core copper
(customer cable (L/N/PE)
side)
AC PDC Outdoor three-core copper
(customer cable (L/N/PE)
side)
Genset Outdoor shielded twisted
control pair cable (eight cores)
signal/ATS
detection
signal
Site ground Outdoor single-core
bar copper cable
(customer
side)
Ground point Outdoor single-core
on the copper cable (capacity
module for expansion scenario)
capacity
expansion
Other End Type
DC switch Common outdoor PV
(customer cable in the industry
side)
Copyright © Huawei Digital Power Technologies Co., Ltd.
9 Preparing Cables
Recommended
Specifications
● Conductor cross-
sectional area: 4–6 mm
● Cable outer diameter:
5.5–9 mm
● Conductor cross-
sectional area: 4–6 mm
● Cable outer diameter:
13.7–16.9 mm
● Conductor cross-
sectional area: 4–6 mm
● Cable outer diameter:
13.7–16.9 mm
● Conductor cross-
sectional area: 0.2–1
2
mm
● Cable outer diameter:
6.3–7.5 mm
Conductor cross-sectional
2
area: 4–6 mm (same as
the cross-sectional area of
the AC input power cable)
Conductor cross-sectional
2
area: 6 mm
Recommended
Specifications
● Conductor cross-
sectional area: 4–6 mm
● Cable outer diameter:
5.5–9 mm
2
2
2
2
96