Hot Starter Lever Installation - Suzuki RM-Z250 Owner's Manual

5-18 SERVICING INFORMATION

HOT STARTER LEVER INSTALLATION

*1 Pass the hot starter cable into the lever cover.
*2 Connect the hot starter cable to the master cylinder holder and hot starter lever.
*3 Pass the hot starter lever into the lever cover.
Tighten the lower bolt first temporarily to provide clearance on the upper side and then tighten both the bolts to
*4
the specified torque.
*5 Install the cover of hot starter lever firmly. Be careful not to damage the lever cover when installing.

ITEM N·m kgf-m
A
12 1.2
B
10 1.0
*5
*1
*2
lbf-ft
8.5
7.0
*3
*4