An Overview Of The Status Indicators - evertz 5550 Operating Instructions Manual

OPERATION
Model 5550 Universal Film Data Decoder Manual
# $ When in either of the setup modes, the # & $ arrow keys are
used to move up or down the main items in the menu system.
The current menu item choice is also shown.
! " When in either of the setup modes the ! & " keys are used to
show the choices for the current item in the menu system.
SETUP Exits the setup mode or the Engineering setup mode and
returns to operating mode.

3.1.2. An Overview of the Status Indicators

There are 8 status indicators located on the front panel that show
operational status of the Film Data Decoder at a glance.
Two code present LEDs indicate when code is being recovered from the
film.
KEYKODE Blinks each time a barcode is successfully read.
TIMECODE Indicates that film timecode is being read.
Two LEDs indicate which KeyKode sensor is active.
35 MM Indicates that one of the 35 mm KeyKode sensors is active.
16 MM Indicates that the 16 mm KeyKode sensor is active.
One LED indicates when the serial communications port is active.
COMM Blinks each time a decoded barcode is sent out the serial
communications port.
Three LEDs indicate what is being displayed on the front panel
KEYCODE Indicates that KeyKode is being displayed
TIMECODE Indicates that Film timecode is being displayed
USERBITS Indicates that USER BITS from the film timecode is being
displayed
Page 3-2