Special Vcg Indicators; General Configuration Items; Table 3-4: Top Level Of The Utility Setup Menu - evertz HD9010-SIE Instruction Manual

3.7.5. Special VCG Indicators

The following special indicators are used between the seconds and frames digits of the time window in
the character inserter to identify non drop frame and drop frame code (NTSC only)
Non Drop Frame
Drop Frame (NTSC) Period (.)
3.8.

GENERAL CONFIGURATION ITEMS

The UTILITY SETUP menu is used to set up various items related to the overall operation of the
HD9010-SIE such as Video standard, LTC output levels, genlock phasing, and firmware versions.
Table 3-4 shows the items available in the UTILITY SETUP menu. Sections 3.8.1 to 3.8.9 give detailed
information about each of the sub menus.
VIDEO STANDARD
REFERENCE MODE
LTC LEVEL
AUX LTC LEVEL
COM 1 BAUD RATE
AUXCOM BAUD RATE
SERIAL MODE
ON AIR MODE
LVS ADDRESS
SYS PARM CLASS
SYS PARM NUMBER
SYS PARM VALUE
HARDWARE VERSION
FIRMWARE VERSION
UPGRADE FIRMWARE
FACTORY RESET
OPERATION
HD9010-SIE High Definition Source ID Encoder Manual
Colon (:)
Sets the video standard
Selects the generator framing reference
Sets the amplitude level of the main LTC output
Sets the amplitude level of the auxiliary LTC output
Sets the baud rate of the COM 1 serial port
Sets the baud rate of the AUX COM serial port
Sets the mode of the AUX COM serial port
Blanks Character windows on the SDI output when 'On Air'
Sets the LVS address that the HD9010-SIE will respond to
Sets the system parameter class for the parameter value to change
Sets the system parameter number for the parameter value to change
Sets the system parameter value
Displays the current hardware version of the unit
Displays the current firmware version of the unit
Load new firmware into the unit
Resets the unit to its Factory default condition

Table 3-4: Top Level of the Utility Setup Menu

Revision 1.2
Page 3-7