Programming The Generator Setup Functions; Configuring The Generator Operating Modes - evertz 5010 SIE Instruction Manual

3.4.

PROGRAMMING THE GENERATOR SETUP FUNCTIONS

SRC ID MODE
5 SRC ID
9 SRC ID
5 SRC ID+STS
TIME 5 SRC ID
TIME 9 SRC ID
TIME 5 SRC ID+STS
OPERATING INSTRUCTIONS
The GENERATOR drop down menu is used to program various generator
modes such as selecting source ID encoding modes, VITC keyer enable,
VITC generator line numbers, etc. Figure 3-4 shows the items on the
GENERATOR drop down menu. The following descriptions appear in the
order they appear on the menu.
ure 3-4: GENERATOR Drop Down Menu

3.4.1. Configuring the Generator Operating Modes

The SRC ID MODE menu item is used to choose a method of encoding the
source ID information. There are 3 parts of the Source ID - time (usually
VTR time code), the source ID message, and VTR Status. The source ID
message itself may be in one of two formats. The first format consists of a
five alphanumeric character message followed by a source number from
000 to 999. The source message and number are usually separated by a
dash(-) in the source id display. The 5 character ID format takes two
frames of VITC to transmit a complete message.
consists of a nine alphanumeric character message. The time and status
portions of the encoded source ID may be turned on and off with this menu
also. The 9 character ID format takes three frames
5 SRC ID Turns off the time and status and encodes the 5 character ID
format.
9 SRC ID Turns off the time and status and encodes the 9 character ID
format.
Model 5010-SIE Source ID Encoder Manual
GENERATOR
SRC ID MODE
5 SRC ID
9 SRC ID
5 SRC ID+STS
TIME 5 SRC ID
TIME 9 SRC ID
TIME 5 SRC ID+STS
VITC KEYER
OFF
ON
GVITC LINES
GEN VITC LINES
LINE 1 LINE 2
10 20
VTR RDR MODE
LTC
VITC
AUTO
Fig
The second format
Page 3-7