Configuring The Sample Rate Converters; Configuring The Audio Input Source - evertz 7700 Manual

High quality down converter

Hide thumbs Also See for 7700:

Table of Contents

7700 MultiFrame Manual

7714HDC High Quality Down Converter

6.6.4. Configuring the Sample Rate Converters

Audio

SRC Mode

Auto

Bypass

Enable

The source of the audio channels can be set to either embedded audio from the video stream, or AES

audio from the AES inputs. There are four controls, one for each audio pair: 1 & 2, 3 & 4, 5 & 6, and 7 &

8. For simplicity, only one control will be shown in the manual.

Audio

Input Ch 1&2 Source

DMX A1

AES1

7714HDC - 28

This control is used to configure the sample rate converters.

Select Auto to use the sample rate conversion if the conditions presented by

the input are suitable.

Select Bypass to bypass all audio synchronization and sample rate

conversion functions.

Select Enable for normal audio synchronization and sample rate conversion

functions.

Select DMX A1 for audio from the de-embedders.

Select AES1 for audio from the AES inputs.

Revision 1.1

Table of Contents

7714hdc