High Capacity Stacker; Stacking Tray - Riso ComColor GL Series User Manual

High Capacity Stacker

By connecting the high capacity stacker, it is possible to output approximately 4,000 sheets of printing paper
(when using plain paper, recycled paper).
The printouts that have been output can be removed at once with the dedicated carriage.
A
Stacking Tray Descent Button
Press this button to remove printouts from the
stacking tray. If you press the stacking tray descent
button, the stacking tray lowers to the bottom (the
position of the carriage). The stacking tray stops
when you press the stacking tray descent button
during lowering. If you press the button again, the
stacking tray continues lowering. The stacking tray
does not operate during printing even if you press the
stacking tray descent button. Press with the right and
left covers closed.
B
Right Cover
Open this cover when removing printouts, setting the
carriage in position, or when removing paper jams.
C
Paper Guide
Use this guide to prevent printouts that have been
output from becoming misaligned.
D
Corrugators
Set the corrugators to feed paper smoothly according
to the paper type and align printouts to stack neatly.
E
Carriage
Set this dedicated carriage inside the high capacity
stacker. Connect the stacking tray to the carriage to
transport high-volume printouts.
F

Stacking Tray

Printouts are output to this tray.
G
Left Cover
If a paper jam occurs while paper is being
transported, open this cover and remove the jammed
paper.
H
High Capacity Stacker Socket
Connect the high capacity stacker power cord. The
socket is located toward the bottom on the rear of the
left cover.
^ ^
• Do not open the cover during printing.
You cannot print with the cover open.
• Be sure to use the dedicated carriage
with the high capacity stacker.
ComColor GL Series User's Guide

High Capacity Stacker

197
8