Table of Contents
Advertisement
Login
Lock icons in the upper right corner of mode
buttons indicate that you must log in to access
those modes.
^
^
•
When logging in for the first time, you need the
temporary password that is issued by the
administrator.
^
^
Logging In
^
^
•
When using an IC card reader, you can log in
by holding the IC card over the card reader.
Press the [Login/Logout] key.
1
On the [Login] screen, select your
2
name.
To find your name, scroll through the screen or
press the index button to display user names.
The [Password] screen appears after you select
your name.
Input your password and touch
3
[Login].
Follow the displayed instructions for operation.
^
^
•
When logging in for the first time, change
the temporary password to your own
password.
When you are successfully logged in, the screen
you were in when you pressed the [Login/Logout]
key appears again. Your user name is displayed at
the bottom left of the screen.
^
^
•
After finishing operations, be sure to
press the [Login/Logout] key to log
out.
^
^
•
Contact your administrator if you cannot
find your name, or if you have forgotten
the password.
•
If your user name does not appear at the
bottom left of the [Home1] screen, touch
the mode button and perform the
operations described in steps 2 and 3
under "Logging In". When you are
successfully logged in, the screen for the
selected mode appears.
^
^
Changing the Login Password
Touch [System Info] on the [Home1]
1
screen after logging in.
Touch [User Info] - [Change
2
Password].
Enter the new password and touch
3
[Next].
On the [Change Password
4
(confirm)] screen, enter the new
password again and touch [OK].
ComColor GL Series User's Guide
Preparation
45
Advertisement
Table of Contents
