Copy Mode Settings - Riso ComColor GL Series User Manual

^ ^
Offset Output
Stack sets of printed documents slightly apart from
one another when printing multiple copies.
^ ^
• When [Program] is configured, [Offset Output]
is [OFF]. (p.125 "Program")
• This setting is not available for paper sizes
that cannot be output to the face down finisher.
• When using the face down finisher, you cannot
use this setting with stapling.
[OFF]
Offset output is not performed.
[Between Sorts]
Sets of printed documents specified in [Sort] are
stacked slightly apart from one another.
[Between Jobs]
Finished print jobs are stacked slightly apart from
one another.
^ ^
Offset Output (Program)
In addition to the "Program" (p.125) function for
printouts, you can stack sets of printed documents
slightly apart from one another to create
separation.
[OFF]
Offset output is not performed.
[Between Sets]
Each set of printed documents is stacked slightly
apart from one another.
[Between Groups]
Groups of printed documents are stacked slightly
apart from one another.

Copy Mode Settings

^ ^
Offset Output ([Program])
In addition to the "Program" (p.74) function for
copying, you can stack sets of printed documents
slightly apart from one another to create
separation.
[OFF]
Offset output is not performed.
[Between Sets]
Each set of printed documents is stacked slightly
apart from one another.
[Between Groups]
Groups of printed documents are stacked slightly
apart from one another.
^ ^
Offset Output ([Separation])
In addition to the "Separation" (p.77) function for
copying, you can stack sets of printed documents
slightly apart from one another to create
separation.
^ ^
• You cannot use [Offset Output] and [Mixed
Size Original] at the same time. (p.65 "Mixed
Size Original")
[OFF]
Offset output is not performed.
[Between Sorts]
Each sorted set is stacked slightly apart from one
another.
[After a Job]
Each print job is stacked slightly apart from one
another.
<Paper that can be offset>
131 mm × 148 mm - 305 mm × 550 mm
(5 3/16" × 5 27/32" - 12" × 21 5/8")
Touch [Separation].
1
Select the offset output setting.
2
Touch [OK].
3
ComColor GL Series User's Guide
Face Down Finisher
183
8