Table of Contents
Advertisement
Chapter 1 Copying
Set the sort and slip sheet options.
5
Set the [Paper] and [Number Printing] options as
well if necessary.
^
^
•
If you are using the optional face down
finisher, high capacity stacker, or
multifunction finisher, you can configure
[Offset Output]. For more information, see
the following:
-
When using the face down finisher
(p.183 "Offset Output ([Program])")
-
When using the high capacity stacker
(p.202 "Offset Output ([Program])")
-
When using the multifunction finisher
(p.216 "Offset Output ([Program])")
Touch [OK].
6
The [Confirm] screen is displayed.
Select [Overwrite] or [Register As].
7
To save by giving it a name, enter a program name
and touch [OK].
The registration is now complete.
In the [Confirm] screen, touch [Close].
^
^
•
If [Do not register] is selected, the detailed
settings that have been specified are
canceled and the display returns to the
program edit screen.
Touch [OK].
8
^
^
Retrieving a Program
You can call a saved program.
Touch [Program].
1
The [Program] screen is displayed.
76
Select the program to call.
2
The registered number of copies and sets are
displayed in a list.
Touch [OK].
3
^
^
Changing the Program
Settings
You can change a saved program.
Touch [Program].
1
The [Program] screen is displayed.
Select a program.
2
The following setting can be configured from the
sub menu:
•
Rename
•
Delete
Follow the on-screen instructions to change the
settings.
Touch [Edit].
3
For specific instructions on subsequent operations,
see steps 3 through 8 in "Saving a Program" (p.75).
ComColor GL Series User's Guide
Advertisement
Table of Contents
