Chapter 8 Optional Equipment
8
Face Down Finisher
If the optional face down finisher is connected, you can staple printed sheets, or perform offset output for
each set of printed documents.
A
Stacking Tray
Printouts are output face down.
B
Stacking Tray Setting Position
Slide into position depending on the paper type or
output condition.
C
Jam Release Cover
D
Staple Cartridge
Pull out the staple cartridge to replace staples, or if a
staple is jammed.
E
Staple Cover
Open this cover if a staple is jammed, or to replace
the staple cartridge.
F
Face Down Finisher Socket
Connect the face down finisher power cord.
178
Optional Equipment
^
^
•
The stacking tray slides. For normal output,
align the [
] and [
Normal (except for the
case shown on the right)
Align [
] and [
].
ComColor GL Series User's Guide
] shown in B.
When using B5 or
smaller paper without
staples
Position [
] and [
]
apart from each other.