Riso ComColor GL Series User Manual page 213

„
Fold Direction
When [Bi-fold], [Inner Tri-fold], or [Outer Tri-fold] is
selected, configure whether the printed surface is
to be facing inward or outward.
^ ^
• When using duplex printing, the first page will
be regarded as the printed surface.
[Print Inside]
The paper will be folded so that the printed surface
is on the inside.
[Print Outside]
The paper will be folded so that the printed surface
is on the outside.
Bi-fold
Inner tri-fold
Outer tri-fold
„
Binding Edge
When [Z-fold] is selected, configure the binding
edge of the paper.
[Bind Left/Top]
The right half of the paper will be folded in the
shape of a Z.
[Bind Right/Bottom]
The left half of the paper will be folded in the shape
of a Z.
^ ^
• When [Mixed Size Original] is configured, it is
possible to select [Z-fold] only for [Fold]. In this
case, the combinations of original sizes that
can be mixed are "A4-LEF and A3", "B5-LEF
and B4", and "Letter-LEF and Ledger". (p.109
"Mixed Size Original")
• When used together with [Mixed Size Original],
for [Orientation], select the orientation of the
original that is larger. (When the A4 original is
vertical and the A3 original is horizontal, select
[Landscape]) (p.109 "Original Size", p.109
"Mixed Size Original")
• For [Paper Size], specify the size of the paper
subject to the Z-fold. (p.110 "Paper Size")
ComColor GL Series User's Guide
Multifunction Finisher
211
8