Table of Contents
Advertisement
Chapter 8 Optional Equipment
•
When using this function with duplex printing,
duplex printing is only applied when the size of
the front and back of the document is the
same. (If the size is not the same, the back of
the page is left blank.) (p.108
"Duplex/Simplex")
•
When used together with [Mixed Size Original],
you can specify [Staple], [Punch], and [Offset
Output]. (p.109 "Mixed Size Original", p.208
"Staple", p.210 "Punch", p.214 "Offset Output")
•
When used together with [Add Cover], the
added cover will be the size after the Z-fold.
(p.119 "Add Cover")
^
^
Booklet Binding
Perform duplex printing of a series of multiple
pages and create a booklet by bi-folding the paper.
The booklet can also be bound in the center with a
staple.
^
^
•
When [Booklet Binding] is configured, [Sort] is
set to [Collated]. (p.109 "Sort")
•
[Booklet Binding] cannot be used together with
[Mixed Size Original], [Combine], [Image
Repeat], [Binding Edge], [Slip Sheet],
[Program], [Blank Page Detection], [Multi-part
Paper Printing], [Staple], [Punch], [Fold],
[Offset Output], and [Output Tray Relay].
(p.109 "Mixed Size Original", p.113 "Combine",
p.114 "Image Repeat", p.118 "Binding Edge",
p.119 "Slip Sheet", p.125 "Program", p.126
"Blank Page Detection", p.127 "Multi-part
Paper Printing", p.180 "Staple", p.210 "Punch",
p.210 "Fold", p.214 "Offset Output", p.214
"Output Tray Relay")
<Types of paper that can be used to create
booklets>
•
A3, B4, A4, B5, Ledger, Legal, Letter,
Foolscap, 8K, 16K, Custom size
^
^
•
You cannot use the paper which has a width
longer than its height.
[OFF]
Booklet binding will not be configured.
[Fold]
The printing paper will be folded in two.
212
[Fold + Staple]
The printing paper is folded in half and bound in
the center with a staple.
Select the booklet binding method and click
[Details] to display the [Booklet Binding] dialog
box.
Configure separating books, center binding, and
separate cover printing.
„
Separating Books
When you have selected [Fold] or [Fold + Staple],
some restrictions apply to the number of sheets
you can fold.
[Fold] creates a separate booklet every 5 sheets
(20 pages), and [Fold + Staple], a booklet every 20
sheets (80 pages).
When the number of pages exceeds these
numbers of sheets, one fold is made every number
of sheets indicated above and the sheets are
output (creating a separate booklet).
The layout order is different depending on whether
middle binding or side binding is performed for the
separate stacks. Therefore, select [OFF] or [ON].
^
^
•
[Separating Books] and [Add Cover] cannot be
used at the same time. (p.119 "Add Cover")
[OFF]
Data is imposed to create a book by opening,
layering, and then binding the sheets (in the
center).
When [OFF] has been selected, the sheets are not
stapled even if [Fold + Staple] is selected.
[ON]
Data is imposed to create a book by folding,
layering, and then binding the sheets (on the side).
Example: 60 pages, set to [Fold], separating books
[OFF]
ComColor GL Series User's Guide
Advertisement
Table of Contents
