Table of Contents
Advertisement
^
^
•
When [ON] is not selected, the sheet width is
set to the width of each paper tray guide. The
maximum length of the relevant tray is used for
the length.
„
Paper Type
[Type], [Thickness]
^
^
•
If the thickness of the paper loaded in the
standard tray is set to [Envelope], duplex
printing cannot be performed from the
standard tray.
•
When the paper with different thickness is
reloaded, you need to confirm the setting of
the paper feed pressure adjustment lever. For
more information, see "Adding or Switching
the Paper in the Standard Tray" (p.48).
•
When either of the following operations is
performed with the standard tray, [Thickness]
is automatically changed to [Envelope]:
-
Selecting an envelope size in [Standard] of
[Paper Size]
-
Loading envelopes whose size can be
detected in the standard tray when [Auto] is
selected for [Paper Size]
After that, when either of the following
operations is performed, [Thickness] returns to
the original setting:
-
Selecting a paper size other than envelopes
in [Standard] of [Paper Size]
-
Loading paper other than envelopes whose
size can be detected in the standard tray
when [Auto] is selected for [Paper Size]
•
The machine selects the color profile
according to the selected paper type. (When
you change the paper type, the printing result
changes.) If the printing result is not what you
expected, change the paper type.
•
When using special paper, you can add
settings to [U1] through [U5] for [Thickness].
For more information, contact your dealer or
authorized service representative.
Scanning Size
Specify the scanning size for originals.
[Auto]
Select this option if you want the scanning size of
the original to be automatically detected.
[Standard]
Select this option when using a standard size
different from that of the original.
[Custom]
Select this option to select from non-standard
paper sizes registered by the administrator in
advance.
[Manual]
Specify a non-standard paper size that is not
registered.
Touch [Scanning Size].
1
The [Scanning Size] screen is displayed.
Specify the scanning size for
2
originals.
To use a non-standard size that is not registered,
touch [
] or [
] on the [Manual] screen to enter
values.
You can also enter the number using the numeric
keys.
ComColor GL Series User's Guide
Copy Settings
1
63
Advertisement
Table of Contents
