Riso ComColor GL Series User Manual page 191

Adjust the paper feed pressure
4
adjustment lever.
For general use, set to "NORMAL". For thick paper
or other paper for special purposes, set to "CARD".
On the operation panel, check the
5
tray settings.
Configure the paper size and type with [Paper Tray].
When changing the paper loaded in a tray, be sure
to change the settings in [Paper Tray].
^ ^
Regarding the Standard Tray
Padding Covers
Depending on the size of the paper being used,
the standard tray padding covers may or may not
be necessary.
„
Cases When the Standard Tray
Padding Covers Are Necessary
Properly attach and use the standard tray padding
covers when the paper size is B5-LEF, A4-LEF, B4,
A3, or a custom size having a width of 257 mm
(10 1/8") or more.
„
Cases When the Standard Tray
Padding Covers Are Not
Necessary
When the size of the paper is less than A4
vertically or more than A3, or when using
envelopes of the C5 or DL-LEF size, remove the
standard tray padding cover. The paper feed guide
cannot be moved while the cover is in place.
ComColor GL Series User's Guide
High Capacity Feeder
189
8