Table of Contents
Advertisement
Connecting to a Computer
„
Connecting to Multiple Computers
„
Connecting to One Computer
^
^
•
The maximum allowable voltage for all input/output connection is 5V.
^
^
•
Use a commercially available ethernet shielded cable. You can use both straight and crossover cables to
connect the machine to computers.
It is recommended that you use one of the following types of ethernet shielded cables according to your
network environment.
-
Cat 5 (Cat 5e) cable for 100BASE network
-
Cat 5e cable for 1000BASE network
•
To print from a computer, you must install the printer driver. For the installation method, see "Installing and
Uninstalling the Printer Driver" (p.50).
•
When connecting the optional print controller, connect to the LAN1 terminal on the rear of the machine.
•
You cannot directly connect the machine to a communication line offered by a telecommunication carrier
(mobile communications company, fixed-line telecoms company, Internet provider, etc.) When connecting the
machine to the network, make sure that the connection is made via a router etc.
Before Use
ComColor GL Series User's Guide
17
Advertisement
Table of Contents
