List Of Settings - Riso ComColor GL Series User Manual

List of Settings

The following is a list of settings available in Copy mode.
^ ^
• There are items that are displayed only when you are using the optional face down finisher, stacking tray, or
multifunction finisher. In such case, the display and functions may differ depending on the optional equipment
that is connected.
Setting item
Color Mode Select color or monochrome printing.
Reproduction
Reduce or enlarge the copied image.
Size
Change the paper tray, paper type, and feed control settings according to the
Paper Selection
copying paper.
Scanning Size Specify the scanning size for originals.
Original
Specify the orientation of the original.
Orientation
Specify the sides of the original to be scanned and the sides of the paper to be
Duplex/Simplex
printed on.
Sort Specify the printing method for making multiple copies of the original.
Scanning Level Adjust the scanning level of originals.
Print Density Specify the print density.
ADF Scan & Copy the original as one job even when having to load the original in multiple sets
Pause due to the large number of pages in the original.
Mixed Size
Copy the original containing pages of the different original sizes.
Original
Book Shadow Remove shadows that appear in the center of images when an open book is
Erasure scanned.
Page Split Scan double-spread pages and split them into two parts (right and left).
Combine Impose continuous pages onto one sheet.
Image Repeat Impose multiple copies of the same original onto one sheet.
Specify the imposition setting when creating a booklet. You can also bi-fold the
Booklet pages and bind them in the center when the optional multifunction finisher is
connected.
Stamp Stamp the page number, date, or text in the header or footer.
Page Border This option adds a border line in the margins of the paper.
Image Quality Specify the resolution for scanning originals.
Select the original type so that the appropriate image processing is performed
Original Type
before printing the scanned data.
Gamma
Adjust the color balance (CMYK) of the scanned data.
Correction
Image Control Specify the image processing appropriate for the original.
Base Color Level Make the background color (base color) lighter so that the text is easier to read.
Image Position Adjust the print position.
Overlay Make copies upon layering an image that has been saved on the storage.
Use this item to:
Overview of Copy Operations
See
p.61
p.61
p.61
p.63
p.64
p.64
p.64
p.65
p.65
p.65
p.65
p.66
p.67
p.68
p.68
p.68
p.69
p.71
p.71
p.71
p.72
p.72
p.72
p.73
p.73
ComColor GL Series User's Guide
1
59