Riso ComColor GL Series User Manual page 31

J
Main Power Switch
Use this switch to turn on the power. Usually the
power is left ON.
K
Main Unit Socket
Connect the main unit power cable to this socket.
L
Paper Feed Guide Levers
Use these levers to slide or fix the standard tray
paper guide. Levers are located on both sides of the
standard tray paper guide, in two places.
M
Left Cover
Open this cover when there is a paper jam.
N
USB Port
Connect a USB flash drive to this port to save the
scanned data or to print the data saved on a USB
flash drive.
^ ^
• You need to use the USB flash drives
compatible with Mass Storage Class and
file system format (FAT16, FAT32, exFAT).
O
Operation Panel
Use to perform operations or settings. You can adjust
the angle so that it is easier to see.
P
ADF Original Unit Lever
Pull this lever up to open the ADF original unit cover
when documents are jammed.
Q
Auto Document Feeder (ADF)
Up to about 200 documents can be automatically fed.
R
ADF Original Guide
Slide to fit the width of the document.
S
ADF Original Output Tray
Documents that are read from the ADF are output
here.
T
Front Cover
Normally the front cover is locked and cannot be
opened. This lock is automatically released when a
paper jam or other problems occur.
To open the front cover in other cases, go to
[Maintenance] from the [Home1] screen and touch
[Front Cover Release].
U
Feed Tray 1, Feed Tray 2, Feed Tray 3
(Feed Trays)
Load the paper to be used for printing here.
^ ^
• Use the standard tray for thick paper and
other special paper types.
V
Paper Alignment Lever
Use this lever to align the documents that are output.
If the lever interferes with output, pull it up and lock it.
ComColor GL Series User's Guide
Part Names and Functions
29