List Of Settings In [Usb] - [Load] - Riso ComColor GL Series User Manual

Chapter 5 USB

List of Settings in [USB] - [Load]

Select the folder on the [USB] - [Load] screen, and touch [Open] to display a list of the documents inside the
folder. When you select a document and touch [Change Setting] in the sub menu, the setting screen is
displayed.
The settings that can be configured on this screen are listed below.
Setting item
Paper Selection
Print Density
Image Position
Slow Printing
Check Setting
^ ^
• If the optional PS kit is installed, PDF files saved on a USB flash drive can also be used. In this case, you can
change the settings for printing PDF files. For more information, see "Printable Files in the USB Flash Drive"
(p.234) in "Optional Equipment".
150
Change the paper tray, paper type, and feed control settings according to the
copying paper.
Specify the print density.
Adjust the print position.
Decrease the printing speed. This also reduces the amount of noise produced by
the machine when printing jobs.
Check the current settings.
Use this item to:
Reference
Page
p.61
p.65
p.73
p.79
p.152
ComColor GL Series User's Guide