Table of Contents
Advertisement
Chapter 8 Optional Equipment
[Layout] Tab
For more information on each setting item, see
"[Layout] Tab" (p.113) in "Printing".
^
^
•
The [Watermark] setting is not available with
the PostScript printer driver.
^
^
Image Shift
Adjust the printing position of images.
^
^
•
You can adjust the printing position a
maximum of ±254 mm (10") up, down, left, or
right, in increments of 0.1 mm (0.004").
•
When performing duplex printing, the front and
back sides can be adjusted separately.
Select the [Image Shift] check box and click
[Details] to display the [Image Shift] dialog box.
Enter a value in the box for the direction that you
want to adjust.
[Front Side], [Back Side]
Enter a value for [Horizontal] or [Vertical].
[Reset]
Resets the entered value to 0 on the front or back
side separately.
Preview
You can preview the adjusted image position on
the front or back side separately.
[Finishing] Tab
For more information on each setting item, see
"[Finishing] tab" (p.118) in "Printing".
^
^
•
For more information on the following function
when using the face down finisher, see "Face
Down Finisher" (p.178):
[Staple], [Offset Output]
•
For more information on the following function
when using the stacking tray, see "Stacking
Tray (Auto-control Stacking Tray / Wide
Stacking Tray)" (p.191):
[Output Tray], [Output Tray Relay]
•
For more information on the following function
when using the high capacity stacker, see
"High Capacity Stacker" (p.197):
[Offset Output], [Output Tray], [Output Tray
Relay]
228
•
For more information on the following function
when using the multifunction finisher, see
"Multifunction Finisher" (p.204):
[Staple], [Punch], [Fold], [Offset Output],
[Output Tray], [Output Tray Relay]
•
[Mail Making] is not available with the
PostScript printer driver when using the
Wrapping Envelope Finisher.
•
[Perfect Binding] is not available with the
PostScript printer driver when using the
Perfect Binder.
^
^
Booklet Binding
Perform duplex printing of a series of multiple
pages and create a booklet by bi-folding the paper.
The booklet can also be bound in the center with a
staple. For more information on booklet binding,
see "Booklet Binding" (p.212) in "Optional
Equipment".
Select the booklet binding method and click
[Details] to display the [Booklet Binding] dialog
box.
„
Separating Books
For the booklet binding, printouts are output upon
being separated per booklet based on a certain
number of pages per volume. The imposition will
differ depending on the settings.
[OFF]
The pages will be imposed so that the pages are in
order when the booklet is bound in the center.
When the data contains a large number of pages,
the booklets will be output as multiple volumes.
The pages will be imposed so that when these
volumes are opened and stacked on top of each
other, they can be bound (center binding) to form a
single booklet.
[Auto]
The pages will be imposed so that when all
volumes that are output are stacked in their folded
state, the pages will be in the correct order. The
volumes will be output per 5 sheets when [Booklet
Binding] is set to [Fold] while they will be output
per 20 sheets when this is set to [Fold + Staple].
ComColor GL Series User's Guide
Advertisement
Table of Contents
