^
^
When Removing Printouts
With the Carriage
Press the stacking tray descent
1
button.
The stacking tray will be automatically lowered to its
lowermost position after approximately 3,200 to
4,000 (full) sheets have been output.
^
^
•
Press the stacking tray descent button in
a state where the covers on both sides of
the high capacity stacker are closed. The
stacking tray will not operate if the covers
are open.
•
Once printing has ended, the stacking tray
will be automatically lowered to a position
configured by the administrator. To
change the position to which the stacking
tray is lowered, contact your administrator.
•
If you accidentally press the stacking tray
descent button while printing, be sure to
remove the printouts. In a state where
printouts exist on the tray, the unit will not
be capable of raising the stacking tray to
the position for output.
Open the right cover of the high
2
capacity stacker.
Pull out the carriage along with the
3
stacking tray on it.
^
^
•
Slowly pull out the carriage while holding
its handle. Abruptly moving the cart may
cause the printouts to collapse.
Remove printouts from the carriage.
4
Return the carriage to the high
5
capacity stacker.
^
^
•
Be sure to return the carriage in a state
where the stacking tray has been set.
Close the right cover of the high
6
capacity stacker.
ComColor GL Series User's Guide
High Capacity Stacker
199
8