Table of Contents
Advertisement
Chapter 2 Scanning
1)
Touch [Preview before sending].
By touching [Continue] in the [Confirm] screen,
the scanning of the original starts and the
preview is displayed.
To switch pages, touch [
To change the address or destination, touch
[Change Address] or [Storage Directory].
Press the [Start] key.
6
The [Scanning] screen is displayed, and scanning of
the original starts. The current status is displayed on
the screen.
•
After the [Confirm] screen is displayed, touch
[Close].
The original is scanned and saved.
„
To cancel scanning
Press the [Stop] key.
1
Scanning is stopped and the Scan screen is
displayed.
^
^
•
When you select [Console] to scan data, the
scanned data is saved to the internal SSD of
the machine.
The saved data can be downloaded to a user's
computer using the RISO Console.
See "[Scan] Menu Screen" (p.162) in "RISO
Console".
•
The storage period for the scanned data is
configured by the administrator.
^
^
•
RISO KAGAKU CORPORATION is not
responsible for the loss of any data on the
machine's internal SSD that may occur
during the use of the machine. For data
protection, it is recommended to back up
data in advance.
88
] or [
].
ComColor GL Series User's Guide
Advertisement
Table of Contents
