Riso ComColor GL Series User Manual page 238

Chapter 8 Optional Equipment
^ ^
List of Settings in [USB] - [Load]
You can change the print settings for PDF files.
Select the folder on the [USB] - [Load] screen, and touch [Open] to display a list of the documents inside the
folder. When you select a document and touch [Print Setting] in the sub menu, the setting screen is
displayed. The settings that can be configured on this screen are listed below.
Setting item
Color Mode
Reproduction
Size
Paper Selection
Duplex/Simplex
Sort
Print Density
Mixed Size
Original
Combine
Image Repeat
Booklet
Stamp
Add Cover
Separation
Binding Margin
Staple / Punch
*
Fold
Slow Printing
Output Tray
236
Select color or monochrome printing.
Specify enlargement or reduction of original images before printing, if needed.
[Fit to Paper] is not available.
Change the paper tray, paper type, and feed control settings according to the paper
used for printing.
Specify the sides of the paper that are printed on.
Specify the sorting method when printing multiple copies.
Specify the print density.
Print the data containing pages of the different page sizes.
Impose continuous pages onto one sheet.
Impose multiple copies of the same original onto one sheet.
Specify the imposition setting when creating a booklet. You can also bi-fold the
pages and bind them in the center when the optional multifunction finisher is
connected.
Stamp the page number, date, or text in the header or footer.
Add front and back covers to the printout.
Insert slip sheets. When the optional face down finisher, high capacity stacker, or
multifunction finisher is connected, the offset output setting is also available.
Specify the binding margin.
Specify the stapling position.
When using the optional face down finisher
When using the optional multifunction finisher
Specify the punch position.
(When using the optional multifunction finisher with the punch unit)
Configure the paper folding settings.
(When using the optional multifunction finisher with the folder unit)
Decrease the printing speed. This also reduces the amount of noise produced by
the machine when printing jobs.
Select the output tray for printouts.
When using the optional auto-control stacking tray / wide stacking tray
When using the optional high capacity stacker
When using the optional multifunction finisher
Use this item to: See
p.61
p.61
p.61
p.108
p.64
p.65
p.109
p.68
p.68
p.68
p.69
p.77
p.77
p.78
p.184
p.216
p.216
p.217
p.79
p.195
p.203
p.219
ComColor GL Series User's Guide