Riso ComColor GL Series User Manual page 215

Example: 60 pages, set to [Fold], separating books
[ON]
„
Center Margin
Enter a value for [Width].
Select the [Auto Reduction] check box to
automatically reduce the printed image to fit the
paper in cases where the margin width does not
allow for the original-scale printed image to fit into
the paper.
„
Booklet Cover
Print only the cover page (the first two pages and
the last two pages of the original) separately. This
setting is convenient for printing the cover and
body using different types of paper.
^ ^
• [Booklet Cover] and [Add Cover] cannot be
used at the same time. (p.119 "Add Cover")
[OFF]
Cover separated printing is not configured.
[Print Cover Only]
The cover page only is printed.
[Print Except Cover]
The pages other than the cover are printed as a
booklet.
[Store Except Cover to Waiting List]
When printing the body pages after printing the
cover, place a check in [Store Except Cover to
Waiting List] to instruct printing from the operation
panel on the machine. In this case, specify the
feed tray that is loaded with printed cover paper.
[Cover Sheet Tray]
[Standard Tray], [Feed Tray 1], [Feed Tray 2],
[Feed Tray 3]
^ ^
• When using the optional high capacity feeder,
[High Capacity Feeder] is displayed in place of
[Standard Tray].
The example describes a situation where the cover
page only is printed separately and later combined
with the body pages for booklet binding.
Click [Print Cover Only] under
1
[Booklet Cover].
Select the [Store Except Cover to
2
Waiting List] check box.
Select [Cover Sheet Tray].
3
Click [OK].
4
Only the cover page is printed and main body data
will be listed in a waiting job.
Load the printed cover onto the tray
5
of the machine configured with
[Cover Sheet Tray].
The following describes the orientation of printed
cover paper loaded in each tray:
For the standard tray:
Touch [Print] on the [Home1]
6
screen.
Select the job.
7
Press the [Start] key.
8
The body pages are printed and combined with the
cover for booklet binding.
ComColor GL Series User's Guide
Multifunction Finisher
For the feed tray:
8
213