[Finishing] Tab - Riso ComColor GL Series User Manual

Chapter 3 Printing

[Finishing] tab

^ ^
Binding Edge
Specify the binding margin.
^ ^
• You cannot use the [Binding Edge] function
with the [Mixed Size Original] or [Booklet]
function. (p.109 "Mixed Size Original", p.114
"Booklet")
[Left], [Right], [Top]
„
Binding Margin Settings
Select the binding edge and click [Details] to
display the [Binding Edge] dialog box.
Specify the margin width.
Select the [Auto Reduction] check box to
automatically reduce the printed image to fit the
paper in cases where the margin width does not
allow for the original-scale printed image to fit into
the paper.
118
^ ^
Staple
If you are using the optional face down finisher or
multifunction finisher, the staple function is
available at the specified position.
For more information, see the following:
• When using the face down finisher (p.180
"Staple")
• When using the multifunction finisher (p.208
"Staple")
^ ^
Punch
If you are using the optional multifunction finisher
with the punch unit, you can configure holes to
punch.
For more information, see "Punch" (p.210) in
"Optional Equipment".
^ ^
Fold
When using the optional multifunction finisher, you
can configure how the paper is folded.
For more information, see "Fold" (p.210) in
"Optional Equipment".
ComColor GL Series User's Guide