Printing At High Speed [180Ppm] - Riso RZ1090 User Manual

Printing at High Speed
By using "180ppm", you can print faster than if you were to simply adjust the "Print Speed".
Important!:
• When internal temperature of the machine is lower than 15° C (59° F), "180ppm" button is grayed-out and cannot
be used. Use the normal print speed adjustment (1 to 5) until the internal temperature of the machine is highter
than 15° C (59° F). The time it takes for the internal temperature to rise depends upon the machine environment.
Touch [180ppm] on the Print Basic
Screen.
Select Print Quantity
Basic Selections
Print Position
180ppm
Silent
D-Feed
Renew Page
Check
Black
READY
Print speed is set at "180ppm" and the Print Speed indi-
cator on the Control Panel is off.
Note:
• To slow down printing speed from "180ppm", press
the key on "Print Speed" adjustment keys/indi-
cator.
• By registering to the Direct Access area, you can set
"180ppm" by a single touch during a printing process.
p.166
• Paper jams may occur more often, depending on the
type of paper you use. In this case, print at the normal
speed.
Functions Admin.
Paper
0.0 mm
A4
0.0 mm
Idle Info
[180ppm]

Printing at High Speed [180ppm]

Functions for Printing
99