Table of Contents
Advertisement
Error Message on computer's Display
Take actions as given below if the following error messages appear on your computer.
Message
The printer is not ready for
printing.
(The device is not ready.)
Cannot print because an
error is found in the current
printer settings.
Description
This message appears when your
RISO printer requires paper or
when it is not connected to your
computer properly.
This message also appears
when the memory of your RISO
printer becomes full during data
transmission because the size of
the document data is too large.
This message appears if the printer
settings (such as paper size or print
orientation) in the application and the
Printer Driver do not match.
Action
Replenish paper or check your RISO printer
and the printer cable for poor connection, and
then restart printing.
Reduce the file size of the document data or
increase the value of the [Timeout] setting in
your computer, and then restart printing.
Change the printer settings in the application
to make them identical with those in the
Printer Driver or vice versa.
121
121
Chapter 7 Appendix
Chapter 7 Appendix
Advertisement
Table of Contents
