Connecting To A Computer - Riso ComColor FT Series User Manual

Connecting to a Computer

 Connecting to Multiple Computers
 Connecting to One Computer
^ ^
• The maximum allowable voltage for all input/output connection is 5V.
• Use a commercially available Ethernet shielded cable.
^ ^
It is recommended that you use one of the following types of Ethernet shielded cables according to your
network environment.
- Cat 5 (Cat 5e) cable for 100BASE network
- Cat 5e cable for 1000BASE network
• To print from a computer, you must install the printer driver. For the installation method, see "Installing the
Printer Driver" (p.49).
• Be sure to use the LAN1 port of the machine when connecting to the optional print controller.
• You cannot directly connect the machine to a communication line offered by a telecommunication carrier
(mobile communications company, fixed-line telecoms company, Internet provider, etc.). When connecting the
machine to the network, make sure that the connection is made via a router etc.
Before Use
ComColor FT Series User's Guide
19