Printing From Computer - Riso CV1200W User Manual

26
Chapter 2 Basic Operations

Printing from Computer

You can print the original data that was created
using a computer on this machine.
BBefore printing, it is necessary to
install the printer driver dedicated for
this machine in the computer.
1
Turn on the power to this machine.
Press the [X] side of the power switch.
2
Check the paper.
(A 22 "Setting up the paper feed tray and the
paper")
3
Check the paper receiving tray.
(A 23 "Setting up the paper receiving tray")
4
Turn on [INTERFACE].
If the [INTERFACE] lamp is off, press the
[INTERFACE] key to light up.
BNote that if you press the [INTER-
FACE] key while the [INTERFACE]
lamp is blinking, the original data
that is being received or was
already received is erased.
5
Set the printing conditions in the
[Print] dialog box on the computer.
Select the name of your printer under [Select
Printer], and then enter the number of copies in
the [Number of copies] field.
■ Example of the [Print] dialog box
BClear the [Collate] check box. If
this check box is selected, mas-
ter making is repeated each time
a single copy is printed.
6
Perform the required settings in
the [Printer Setup]
Click [Preferences]
and then perform the following settings.
1
The screen name and button name may vary
depending on the application software that you
use.
1
screen.
in the [Print] dialog box,
1