4.11 Cover Sheet Tray (only if an HC Finisher is connected)
Set the size and type of paper to be loaded in the Cover Sheet Tray in the optional Finisher. Be sure to set them when you have
changed the type or size of paper.
" " " " Settings
4.11.1 Paper Size
Can be selected from Auto, A3, B4, A4, B5, A4-R, B5-R, Ledger, Legal, Letter, Letter-R.
4.11.2 Paper Type
Can be selected from Standard Paper 1, High-Quality 1, High-Quality 2, Paper Type 1 - 5 (*).
*Types that have been registered in "5.2 Paper Type Entry" are displayed.
1
Press the MENU Key.
2
Press the
or
"Configuration."
3
Press the OK Key.
Paper Size
1
Check that "Paper Size" is displayed.
2
Press the OK Key.
3
Press the
or
desired size.
4
Press the OK Key.
When the screen in step 1 reappears, you can continue
setting.To exit the setting, press the PRINT/PAUSE
key.
key to display
key to select the
4
Press the
or
"Cover Sheet Tray"
5
Press the OK Key.
The submenu of "Cover Sheet Tray" is displayed.
2
key to display
2-29