W24-1150 (Face down tray full) at installation
When slightly thin paper is used (80g/m2 etc), ejection speed might not be enough depends on paper condition.
You can change (speed up) the ejection speed by test mode 1855
End wall
There are two kind of end wall in the field, please refer to the technical bulletin CCT-014
Default TM1855 setting is "2"
125
Tail of paper is remained on the end wall
Test mode 1855
0; Fastest
1; Faster
2; Normal (latest production machine)
Default TM1855 setting is "0"
Maintenance
Paper Jam