Table of Contents
Advertisement
Error Codes
Error Codes
DANGER
ELECTRIC SHOCK HAZARD
This equipment can be powered by more than 240V.
Contact with this voltage will cause death or serious
injury.
•
Turn off and disconnect power at main switch
before disconnecting any cables and before
troubleshooting and servicing equipment.
•
All electrical wiring must be done by a qualified
electrician and comply with all local codes and
regulations.
The equipment surfaces and components can
become very hot. To avoid severe burns, wear
protective gloves and clothing that will insulate your
hands and body from the hot surfaces and adhesive
material.
This equipment stays pressurized until pressure is
manually relieved. To help prevent serious injury from
pressurized fluid, such as skin injection, splashing
fluid, and moving parts, follow the Pressure Relief
Procedure, page 26 when you stop spraying and
prior to troubleshooting and servicing the equipment.
To avoid injury due to unexpected machine operation
initiated by a remote controller, disconnect the I/O
cable from the system prior to troubleshooting.
•
View error codes on the ADM Screen: Select the
Menu Symbol
> Logs > Errors.
•
Acknowledge an Error: Press the check mark
button.
74
Zone (C) Lookup Table
Some error codes are zone and component-specific.
Use the Zone Lookup Table to identify which
component caused the error.
For example: T4D(C) means an applicator or hose
deviated above the temperature setpoint. T4D2 means
Channel 1 Hose deviated above the setpoint.
(C)
Channel and Component
1
Channel 1 Applicator
2
Channel 1 Hose
3
Channel 2 Applicator
4
Channel 2 Hose
5
Channel 3 Applicator
6
Channel 3 Hose
7
Channel 4 Applicator
8
Channel 4 Hose
3A7259C
Advertisement
Table of Contents
Troubleshooting
