Graco InvisiPac HM10 Instructions Manual page 139

HM10
Temperature Specifications
Time to Temperature*
Control Temperature Range
Ambient Temperature Range
Pressure Specifications
System Air Supply Inlet
Pump Operating Air Pressure Range
(set with regulator on front of system)
Pump Operating Fluid Pressure
Range
Air Consumption Specifications
Average air use at 5 lb/hr**
Average air use at 10 lb/hr**
Required Supply Air Tubing Size
Minimum Air Tubing Inner Diameter
Minimum Air Tubing Inner Diameter
(50 ft, 15.2 m or longer tubing)
Other Specifications
Sound Pressure Level***
Weight
240V On-Board Hopper Models
480V On-Board Hopper Models
240V Remote Vacuum Feed
Models
480 Remote Vacuum Feed Models
Wetted Parts
HM10 Wetted Parts
* From 70°F–350°F (21°C–177°C), dependent upon power supply and machine configuration.
** Includes intermittent air use up to 13 scfm (22 scmh) when vacuum system is feeding.
*** Sound pressure level measured 3.1 ft (1 meter) from equipment.
California Proposition 65
CALIFORNIA RESIDENTS
WARNING: Cancer and reproductive harm. – www.P65warnings.ca.gov.
3A7259C
US
100°–400°F
32°–122°F
80–100 psi
20–100 psi
240–1200 psi
1.9 scfm
2.78 scfm
3/8 in.
1/2 in.
80 lb
154 lb
72 lb
146 lb
PTFE, chemically resistant o-rings, aluminum, stainless steel, zinc plating,
carbon steel, brass, carbide, chrome
Less than 10 minutes
0.55–0.69 MPa (5.5–7 bar)
0.14–0.69 MPa (0.7–7 bar)
1.7–8 MPa (17–80 bar)
77 db(A)
Technical Specifications
Metric
38°–204°C
0°–50°C
3.3 scmh
4.78 scmh
9.5 mm
12.7 mm
36 kg
70 kg
32 kg
66 kg
139