Graco InvisiPac HM10 Instructions Manual page 67

Command
Interface - Description
Command ID
0x0306 Specific Graviyt
0x0307 Customer Input 1 Type
0x0308 Customer Input 2 Type
0x0309 Customer Input 3 Type
0x030A Customer Input 4 Type
0x030B Customer Input 5 Type
0x030C Customer Input 6 Type
0x030D Customer Output 1 Type
0x030E Customer Output 2 Type
0x030E Channel installed Bitmask
Pump Idle Time to System
0x0310
Inactive
0x0311 Circuit Breaker Size
0x0313 Refill Setting
0x0318 CH1 Gun RTD type
3A7259C
Variable Definition
Specific Gravity in thousands (a value of 1000
corresponds to 1.000 grams/cc)
Value - Setting
0 - Unused
1 - Heaters On/Off
2 – Pump Enable/Disable
3 - Channel 1 Enable/Disable
4 - Channel 2 Enable/Disable
5 - Channel 3 Enable/Disable
6 - Channel 4 Enable/Disable
7 - Channel 5 Enable/Disable
8 - Channel 6 Enable/Disable
9 - Channel 7 Enable/Disable
10 - Channel 8 Enable/Disable
Customer Input 2 Type
See Customer Input 1 Type
See Customer Input 1 Type
See Customer Input 1 Type
See Customer Input 1 Type
Value - Setting
0 - Unused
1 - System Ready
2 - Error (Alarm)
3 - Error (Deviation/Advisory)
4 - Maintenance Due
See Customer Output 1 Type
Bit...Channel
0.....Channel1
1.....Channel 2
2.....Channel 3
3.....Channel 4
4.....Channel 5
5.....Channel 6
6.....Channel 7
7.....Channel 8
A value of 0x0F enables channels 1-4 and disables
channels 5-8.
A value of 0 x F0 disables this feature and enables
channels 5-8.
Pump idle time to system inactive in minutes
NOTE: a value of 0 disables this feature (system will
never go inactive due to pump inactivity)
Circuit breaker size in mA
(a value of 20000 corresponds to a 20 A breaker on the
power supplied to the system)
Value - Setting
0 - Manual Refill
1 - Automatic Refill
See CH1 Gun RTD Type
Communications Gateway Module (CGM)
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
67