Hopper Kits - Graco InvisiPac HM10 Instructions Manual

Hopper Kits

See Hopper Repair, page 87 for repair instructions.
Hopper Standoff Kit 20B927
Ref. Description
38 Threaded Hex Stud
39 Threaded Damper Stud
14 Hex Flange Head Nut
Hopper Feed Tube and Clamp Kit 20B915
Ref. Description
51 Hose Clamp, 11/16-1-1/2 in diameter
54 Clear Tube, pvc
Hopper Lid Replacement Kit 20B916
Ref. Description
48 Hopper Lid
49 Hopper Window
4 Lock Hex Nut
3 Flat Washer
Hopper Bowl Kit 20B913
Ref. Description
40 Bowl Assembly
14 Flange Head Hex Nut
Venturi Feed Assembly Kit 20B914
Ref. Description
53 Venturi Assembly
44 Plain Washer 3/16 in.
55 Hex Head Cap Screw, 10-24 x .38
3A7259C
ADM Kits
ADM Screen Protector Kit 18D314PKG
Tear-off screen protector for ADM screen. 10-pack.
Qty.
Remote Mount for ADM 20B690
4
1. Switch the front door panel (1405) with the ADM
4
panel on the unit.
4
2. Attach the USB and CAN connectors in the
enclosure to the back of the ADM.
Qty.
3. For 2 channel units, plug the USB bulkhead into the
right angle cable, and the right angle cable into the
2
USB port on the side of the ADM. For 4 channel
1.44 ft
units, plug the USB bulkhead into the USB hub
mounted on the back of the ADM, and plug the
USB hub into the right angle USB cable that plugs
into the ADM.
Qty.
1
4. Connect the CAN cable (1409) (not shown) between
the bulkhead (1404) and the HM10.
1
6
6
1406
226
Qty.
1
4
Qty.
1
3
1405
3
Ref. Description
1401 Enclosure, Remote Mount Painted
1402 USB Plug Harness, Bulkhead, 32 in.
1403 Dust Cover, Bulkhead Receptical
1404 GCA Cable, M12-5P
1405 Front Door, Painted
1406 Foam Gasket, Door
226 Hex Head Flange Screw
1408 Washer Lock, Internal
1409 CAN Cable, 6 m
Repair Kits
1401
1408
1402
1404
1403
Qty.
1
1
1
1
1
1
2
1
1
121