Table of Contents
Advertisement
Repair Kits
6. Mount the light tower (1501) to the bracket (1502)
using the supplied hardware.
7. Run the light tower communication cable through
the cord grip frame (1506) and into the electrical
enclosure.
8. Connect the light tower cable to the mating cable
labeled LIGHT_TWR that is attached to the terminal
blocks.
9. Connect the square plug lead labeled J7-1, J7-2,
etc. to terminal J7 on the AMZ.
10. Connect the assembly to 24V via terminal J3.
a. Connect the red lead labeled J3-24 OUT+ to
terminal 24V OUT+.
b. Connect the blue lead labeled J3-24 OUT- to
terminal 24V OUT-.
F
. 107
IG
124
F
. 108
IG
11. Follow instructions to Install the ADM Screen,
page 83.
3A7259C
Advertisement
Table of Contents
Troubleshooting
