Graco InvisiPac HM10 Instructions Manual page 68

Communications Gateway Module (CGM)
Command
Interface - Description
Command ID
0x0319 CH2 Gun RTD type
0x031A CH3 Gun RTD type
0x031B CH4 Gun RTD type
0x031C CH5 Gun RTD type
0x031D CH6 Gun RTD type
0x031E CH7 Gun RTD type
0x031E CH8 Gun RTD type
Resettable Pump Cycle
0x0401
Counter
Pump Lifetime Cycle
0x0402
Counter
Resettable AUX Unit
0x0403
Counter
0x0404 Lifetime AUX Unit Counter
Resettable Pump Weight
0x0407
Totalizer
Pump Lifetime Weight
0x0408
Totalizer
0x0605 Acknowledge All Events
0x0606 Acknowledge Event
Acknowledge Current
0x0607
Event
0x0608 Current Event
68
Variable Definition
See CH1 Gun RTD Type
See CH1 Gun RTD Type
See CH1 Gun RTD Type
See CH1 Gun RTD Type
See CH1 Gun RTD Type
See CH1 Gun RTD Type
See CH1 Gun RTD Type
Resettable pump cycle count. Write value of 0 to reset
counter.
Lifetime pump cycle count.
Resettable AUX unit count. Write value of 0 to reset
counter.
NOTE: this counter only includes units counted using
the sensor on the System IO Board, not units counted
using the pattern controller.
Lifetime AUX unit count.
NOTE: this counter only includes units counted using
the sensor on the System IO Board, not units counted
using the pattern controller
Resettable pump weight totalizer in tenths of lbs or
kgs (follows the Mass Units setting selected). Write
value of 0 to reset totalizer.
Lifetime pump weight totalizer in tenths of lbs or kgs
(follows the Mass Units setting selected).
Value - Setting
Any - Acknowledges all system events requiring
acknowledgment (if any are present)
Returns current event (flashing on ADM screen)
requiring acknowledgment (if any are present) in the
format of 0xDDCCBBAA.
AA - first character of error code
BB - second character of error code
CC - third character of error code
DD - fourth character of error code
Acknowledges current event (flashing on ADM screen)
that requires acknowledgment (if any are present)
Returns current event (flashing on ADM screen)
requiring acknowledgment (if any are present) in the
format of 0xDDCCBBAA.
AA - first character of error code
BB - second character of error code
CC - third character of error code
DD - fourth character of error code
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read
Read/Write
Read
Read/Write
Read
Write
Write
Write
Read
3A7259C