Data Management - Graco InvisiPac HM10 Instructions Manual

Setup Screens
Set system and component settings. See Set Baseline
ADM Settings, page 19 for basic configurations and
instructions. See page 43 for additional screen details.
- Gun Setup
- General
- PLC I/O
- Material Tracking
- Maintenance
Advanced Screens
Configure and view system settings and preferences.
See page 45 for details.
- Display
- Units
- USB
- Software
- EtherNet/IP (if the respective CGM is attached)
- PROFINET (if the respective CGM is attached)
3A7259C

Data Management

Download Log Files to a USB
The InvisiPac HM10 has the ability to download runtime
information to a USB drive. The information is stored as
a collection of CSV files containing information
including event/error history, material usage, diagnostic
data, and system settings and temperatures.
1. Navigate to the USB Screen: Advanced > USB
Screen.
2. Ensure Enable USB log downloads is checked.
3. Insert a USB drive into the USB slot.
4. A Logs Download in Progress message will
generate on the screen. Press the check mark.
5. A download complete message generates when a
download completes.
F . 39: Logs Download Complete Screen
IG
NOTE: Removing the USB drive before the download
completes or a faulty USB drive will generate a
download has failed message.
F . 40: Logs Download Failure Screen
IG
ADM Guide
37