Graco InvisiPac HM10 Instructions Manual page 38

ADM Guide
Download System Settings
The InvisiPac HM10 is able to download configured
settings and temperatures to a USB drive. Once
downloaded, the user can keep the file as a backup or
upload the settings to additional InvisiPac HM10 units.
1. Insert a USB drive into the USB slot.
2. Navigate to the USB Screen: Advanced > USB
Screen.
3. Press the download settings button.
4. A download complete message generates when a
download completes. The settings file will be in the
root of the USB drive.
F . 41: Settings Download Complete Screen
IG
NOTE: If the AMZ board is not connected, or if there is
an issue with the USB drive, a download has failed
message will generate.
F . 42: Settings Download Failure Screen
IG
38
Upload System Settings
1. Download the system settings to a USB drive.
2. Insert the USB drive into the USB slot.
3. Navigate to the USB Screen: Advanced > USB
Screen.
4. Press the Upload settings button.
5. An upload complete message generates when a
upload completes. The settings file on the USB
drive will be unchanged.
NOTE: An error message will generate if the settings file
is invalid or cannot be found.
NOTE: If the AMZ board is not connected, or if there is
an issue with the USB drive, an upload has failed
message will generate.
3A7259C