and figure below.
Montage Connections (referring to the Chapter: Signal Connection)
Note: If montage is to be enabled, please ensure Output Settings is in the third case: Custom
Scaling, namely, set Scaling as enable while Custom Scaling as disable.
6.8.4 Load Cabinet File
Connect NovaPro HD to PC and run NovaLCT-Mars on PC. Import cabinet configuration file
saved before into the controller.
1) Save cabinet configuration file
After receiving card is configured, click Save File to save cabinet configuration file (.rcfg) to
local file on PC.
www.novastar.tech
Total Width(H)
Total Height(V)
Load Area Width
Load Area Height
Load Area X
Load Area Y
Pro HD(1)
Pro HD(2)
4000
1000
2000
2000
1000
1000
0
2000
0
0
NovaPro HD User's Manual
-21-