Table of Contents
Advertisement
a.
Choose
input source
b.
Set Mode to Custom or Standard, and then set the resolution and frame rate.
Custom: Set the resolution manually.
Standard: Select the desired resolution from the drop-down options.
c.
After the settings are done, click Apply.
Internal sources
a.
Choose Internal > Image, and then select a static picture or a motion picture.
b.
When the relevant parameters of the image are displayed, set the parameters according to your actual
needs; otherwise, please skip this step.
c.
Press the BACK button to go back to the upper-level menu and select Resolution.
d.
Set Mode to Custom or Standard, and then set the resolution and frame rate.
e.
After the settings are done, click Apply.
5.1.2 Load Cabinet Config File
When the cabinet cannot display images normally, send the cabinet configuration file (.rcfgx) to the cabinet and save
it to let the cabinet display image normally. Before the operation, please import cabinet configuration file with VMP, or
store the cabinet configuration file in the root directory of the USB drive and insert the USB drive into the USB port on
the device front panel.
On the main menu screen, choose Screen Configuration > Send Cabinet Config File.
Figure 5-2 Send cabinet config file
Select the target configuration file.
Select Yes in the displayed dialog box.
After the configuration file is successfully sent, a message appears on the menu screen and then then you will
automatically return to configuration file screen.
Press the BACK button to go back to the upper-level menu.
Select Save to RV Card.
Select Yes in the displayed dialog box.
After the configuration file is successfully saved, a message appears on the menu screen.
5.1.3 Swift Layout
Set the screen configuration parameters to quickly complete the cabinet connection, so that the LED screen can
display the input source image normally.
www.novastar.tech
> EDID. The
input source
is HDMI1, HDMI2, or DP.
MX30 LED Display Controller User Manual
11
Advertisement
Table of Contents
