14Ch Color Correction - NovaStar CX40 Pro User Manual

Set the colors before and after replacement.

Method 1: Click the color area in

Method 2: Click the eyedropper in
Figure 6-13 Color Replacement
Set Hue Tolerance, Hue Softness, Shadow Strength and Skin tone Protect.

Hue Tolerance: Indicates the hue range of the color to be replaced. The larger the value, the larger the
replacement area.

Hue Softness: Indicates the hue softness of the transition area.

Shadow Strength: Indicates the gradient parameter of the highlight or shadow area. The larger the value, the
smoother the gradient.

Skin tone Protect: Keeps the skin tone as original as possible.
After the parameter setting is complete, you can select Processing on the device main menu screen and select
Color Replacement to perform the on/off operation.
Figure 6-14 Color Replacement

6.6.2 14Ch Color Correction

Support precise adjustment to hue, saturation and brightness of black, white and the 12 derived standard colors of
the red, green and blue primary colors.
This function only has an on/off switch on the CX40 Pro. You need to follow the steps below to set the specific
parameters in VMP.
Run VMP and connect devices.
Select Processing and set the 14Ch Color Correction switch to
Click a value of a color to enable the editing status and change the value,
www.novastar.tech
CX40 Pro LED Display Controller User Manual
to open the color palette and set a color.
and select a color in the topology area.
.
, for example.
23