Display Control - NovaStar VX1000 User Manual

Figure 5-23 Image mosaic
Step 3 Set the mosaic-related parameters for each device.

Total H Pixels: The number of pixels in the horizontal direction of the LED screen

Total V Pixels: The number of pixels in the vertical direction of the LED screen

Load Area Width: The number of pixels in the horizontal direction of the area loaded by the current device

Load Area Height: The number of pixels in the vertical direction of the area loaded by the current device

Load Area Initial X: The initial horizontal coordinate of the top-left corner of the area loaded by the current
device. The unit is pixel.

Load Area Initial X: The initial vertical coordinate of the top-left corner of the area loaded by the current
device. The unit is pixel.

Display Control

On the main menu screen, rotate the knob to select Display Control and press the knob to enter the display
control settings screen.
Figure 5-24 Display control

Normal: Display the content of the current input source.

Freeze: Freeze the current frame of the output image.

FTB: Make the output image fade to black.

Test Pattern: Display the test pattern on the screen.
The test patterns are used to test the display effect of the LED screen and the working status of each LED.
The test patterns include Pure Color, Gradient, Grid and more.

Main Layer Trans: Set the animation presented when the input source of the main layer is being switched
to another. Currently, Fade and Cut are supported.

Trans Duration (s): Set the time length the transition effect lasts. When Main Layer Trans is set to Fade,
this option is available. The value ranges from 0 to 2.0 and defaults to 0.5.

FTB Duration (s): Set the time length the FTB process lasts. The value ranges from 0 to 2.0 and defaults to
0.
www.novastar.tech
VX1000 All-in-One Controller User Manual
26