Screen Configuration; Set Input Source - NovaStar CX40 Pro User Manual

5

Screen Configuration

5.1 Set Input Source

Select the desired input source and complete the related settings, such as resolution and frame rate. If the
resolutions of the input source and screen are the same, the image can be displayed pixel to pixel. A lower frame rate
may result in image flickering, while a higher frame rate helps stabilize the display image.
Note
Input source settings are required for screen configuration in the Send-Only Controller working mode and not
required in the All-In-One Controller working mode.
On the main menu screen, choose Input > Select Source to enter the input settings screen.
Figure 5-1 Select source
Select an input source, and perform the corresponding operations for the input source according to the input source
type. For the SDI sources, please skip this step.

External input sources (HDMI, DP)
a.
Choose input source
b.
Set the resolution and frame rate of the input source.
Custom: Set the resolution manually.
Listed standard resolutions: Select the desired resolution from the listed ones.
c.
After the settings are done, tap Apply.
www.novastar.tech
> EDID. The input source is HDMI or DP.
CX40 Pro LED Display Controller User Manual
10