Step 2: Screen Settings - NovaStar LVP6082 User Manual

knob to confirm and apply. If not confirmed, the custom resolution settings will be unavailable.

6.4 Step 2: Screen Settings

Preconditions of screen settings:
1) Each Ethernet port must load the same number of cabinets (If the number of cabinets is
not integer multiples of the Ethernet ports, the remaining cabinets will be loaded by the
last Ethernet port);
2) Regular screen, regular cabinets, each cabinet with the same size.
Operating steps of screen settings:
Step 1 Turn on the power of LED display. If the cabinets display normally, go to step 2. If
the cabinets display abnormally, it is required to load the cabinet file first and save it to
receiving card. Please see detailed operations in
Step 2 Enter into the submenu of "Screen Settings" submenu. The options are shown in
the following figure:
Step 3 Set Cabinet Row QTY and Cabinet Column QTY according to the actual situation of
the screen.
Step 4 Set Port1 Cabinet QTY. The device has some limitations on the cabinet quantity of
www.novastar.tech
NovaPro HD User's Manual
Advanced Settings.
-10-