Table of Contents
Advertisement
Configuring 802.1Q VLAN
Ingress Checking
Acceptable Frame
Types
LAG
Details
Enable or disable Ingress Checking. With this function enabled, the port will
accept the packet of which the VLAN ID is in the port's VLAN list and discard
others. With this function disabled, the port will forward the packet directly.
Select the acceptable frame type for the port and the port will perform this
operation before Ingress Checking.
Admit All: The port will accept both the tagged packets and the untagged
packets.
Tagged Only: The port will accept the tagged packets only.
Displays the LAG (Link Aggregation Group) which the port belongs to.
Click the Details button to view the VLANs to which the port belongs.
802.1Q VLAN Configuration
Configuration Guide
143
Advertisement
Table of Contents
