Table of Contents
Advertisement
Managing MAC Address Table
MAC Address
VLAN ID
Port
2) Click Create.
Binding Dynamic Address Entries
If some dynamic address entries are frequently used, you can bind these entries as static
entries.
Choose the menu L2 FEATURES > Switching > MAC Address > Dynamic Address to load
the following page.
Figure 2-2 Binding Dynamic MAC Address Entries
Follow these steps to bind dynamic MAC address entries:
1) In the Dynamic Address Table section, Select your desired MAC address entries.
2) Click Bind, and then the selected entries will become static MAC address entries.
Enter the static MAC address to be added to the static MAC address entry.
Specify an existing VLAN in which packets with the specific MAC address are
received.
Specify a port to which packets with the specific MAC address are forwarded. The
port must belong to the specified VLAN.
After you have added the static MAC address, if the corresponding port number
of the MAC address is not correct, or the connected port (or the device) has been
changed, the switch cannot forward the packets correctly. Please reset the static
address entry appropriately.
MAC Address Configurations
Configuration Guide
132
Advertisement
Table of Contents
